Industrial Control & Instrumentation
ICC 241-T3 Passive Isolator
- Brand:
- Eaton/MTL
- Model:
- 241-T3
RM 167.70
Only 2 left in stock
Order via WhatsAppCollection in Puchong, Selangor: collect your order from KLAE PLT, No. 53, Jalan Metro 1/1, Bandar Metro Puchong, 47160 Puchong, Selangor, Malaysia — or arrange your own courier or rider to collect it for you. Shipping & Collection Policy Payment: Pay online by FPX (online banking) through Billplz, or by bank transfer. Items in an unpaid order are reserved for 48 hours.
Description
The ICC241 is a loop-powered isolator with a number of possible applications, including isolating and repeating a 4 to 20mA signal from a controller to drive an I/P converter, or isolating the signal from a transmitter. This unit is the T3 variant, rated for loads up to 600Ω and fitted with a load-trimming potentiometer for optimising accuracy across load changes. Galvanic isolation between input and output simplifies interface wiring by eliminating earthing and ground-loop problems.
Specifications
| Number of channels | One |
|---|---|
| Input signal | 4 to 20mA |
| Output signal | 4 to 20mA |
| Isolation between input and output | 1500V dc/ac |
| Maximum input voltage (output open circuit or >700Ω) | 24V typical |
| Voltage drop across isolator (Vin) | <4.9V (T3 option) including test resistors, plus voltage drop across the load |
| Load (RL) range for specified performance (T3) | 100 to 600Ω |
| Transfer accuracy at 25°C (including non-linearity and hysteresis) | Better than 20µA |
| Temperature drift | <0.01% of span/°C |
| Response time | To reach 90% of span: 40ms To reach 99.9% of span: 100ms |
| Common mode rejection ratio | 150dB typical |
| RFI susceptibility | Conforms to IEC801.3 |
| Ambient temperature limits | -20°C to +55°C (operating) -40°C to +80°C (storage) |
| Humidity | 5 to 95% RH, non-condensing |
| Terminals | Accommodate 2.5mm² conductors |
| Casing | 25mm width polyamide casing |
| Mounting | Directly onto T- or G-section DIN-rail to DIN46277 |