Industrial Control & Instrumentation
ICC212 Repeater Power Supply
- Brand:
- Eaton/MTL
- Model:
- 212
RM 268.20
Only 1 left in stock
Order via WhatsAppCollection in Puchong, Selangor: collect your order from KLAE PLT, No. 53, Jalan Metro 1/1, Bandar Metro Puchong, 47160 Puchong, Selangor, Malaysia — or arrange your own courier or rider to collect it for you. Shipping & Collection Policy Payment: Pay online by FPX (online banking) through Billplz, or by bank transfer. Items in an unpaid order are reserved for 48 hours.
Description
ICC212 is a dual-purpose, current-to-current converter with three-port isolation. It provides a fully floating, isolated dc supply for energising a conventional 2- or 3-wire 4 to 20mA transmitter/’smart’ transmitter and repeats the current in another isolated circuit, or accepts a 4 to 20mA signal from a controller/source to drive loads up to 650Ω. A 20–35V dc power supply is required for operation. The power supply terminations are at the top of the unit to enable this model to be used either as a repeater power supply or driver. For a 2-wire smart transmitter the unit also allows bi-directional transmission of digital communication signals superimposed on the 4 to 20mA signal so that the transmitter can be interrogated either from the operator station or by a hand-held configurator.
Specifications
| Number of channels | 1 |
|---|---|
| Input and output signal range | 0 to 20mA for normal operation 4 to 20mA for operations with digital communication |
| Isolation (between power supply, input and output) | 1500V dc/ac |
| Power supply voltage (Vs ) | 20 to 35V dc |
| LED indicator | One green LED indicating POWER ON |
| Voltage available to transmitter | 20V minimum at 20mA |
| Digital signal bandwidth | 100Hz to 10kHz |
| Maximum load resistance | Conventional transmitters/drivers: 650Ω Smart transmitters: 220Ω to 650Ω |
| Voltage drop across input from current source (terminals 5 & 6) | <1V |
| Transfer accuracy at 25°C (including non-linearity and hysteresis) | Better than 20µA |
| Temperature drift | <1µA/°C |
| Response time | To reach 90% of span: 80ms To reach 99.9% of span: 280ms |
| Power requirement (supplying a transmitter) | 135mA max at 20V with a 20mA signal 95mA max at 35V with a 20mA signal |
| Power requirement (current source input) | 90mA at 20V with 20mA signal 65mA at 35V with a 20mA signal |
| Common mode rejection ratio | 150dB typical |
| Ambient temperature limits | -20°C to +55°C (operating) -40°C to +80°C (storage) |
| Humidity | 5 to 95% RH non-condensing |
| Terminals | Accommodate 2.5mm2 conductors For power supply, removable 2-way, plug-in type connector provided at the top of the unit |
| Casing | 25mm width polyamide casing |
| Mounting | Directly onto T- or G-section DIN-rail to DIN46277 |
| List of compatible devices for digital communication | All HART® compatible devices |