Industrial Control & Instrumentation
ICC 312 Dual Output 4/20mA Isolator
- Brand:
- Eaton/MTL
- Model:
- 312
RM 509.70
88 units available
Order via WhatsAppCollection in Puchong, Selangor: collect your order from KLAE PLT, No. 53, Jalan Metro 1/1, Bandar Metro Puchong, 47160 Puchong, Selangor, Malaysia — or arrange your own courier or rider to collect it for you. Shipping & Collection Policy Payment: Pay online by FPX (online banking) through Billplz, or by bank transfer. Items in an unpaid order are reserved for 48 hours.
Description
The ICC312 is an independently powered isolator providing a fully isolated dc supply for a 2-wire transmitter while transferring the transmitter current to two separate isolated 4 to 20mA output circuits driving loads up to 1kΩ. An isolated line-fault detection (LFD) output is provided via open collector, which turns off if the input cable is broken.
Specifications
| Number of input channels | One (either terminals 7 & 8 or 8 & 9) |
|---|---|
| Input channel (terminals 7 & 8) | 2-wire transmitter supply: 4 to 20mA |
| Input channel (terminals 8 & 9) | 4 to 20mA current source |
| Number of output channels | Two |
| Isolation between input, output 1, output 2 and power supply | 1500V dc/ac |
| Power supply | 20 to 35V dc |
| Voltage available for transmitter | 20V minimum at 20mA |
| Voltage drop across input from current source (terminals 8 & 9) | 2.4V maximum |
| Power requirements (supplying a transmitter) | 150mA maximum at 20V dc with a 20mA signal 120mA maximum at 35V dc with a 20mA signal |
| Power requirements (from a current source) | 110mA maximum at 20V dc with a 20mA signal 90mA maximum at 35V dc with a 20mA signal |
| Load resistance | 0 to 1kΩ |
| Transfer accuracy at 25°C for both outputs | Better than 20µA |
| Line-fault detection (LFD) output | Transistor open collector output |
| Response time | To reach 90% of span: 80ms To reach 99.9% of span: 280ms |
| Temperature drift | <1µA/°C |
| Common mode rejection ratio | 150dB typical |
| RFI susceptibility | Conforms to IEC801.3 |
| Ambient temperature limits | -20°C to +55°C (operating) -40°C to +80°C (storage) |
| Humidity | 5 to 95% RH, non-condensing |
| Terminals | Accommodate 2.5mm² conductors |
| Casing | 40mm width polyamide casing |
| Mounting | Directly onto T- or G-section DIN-rail to DIN46277 |