Skip to main content
KLAE PLT
MTL4021 Solenoid/Alarm Driver

Industrial Control & Instrumentation

MTL4021 Solenoid/Alarm Driver

Brand:
Eaton/MTL
Model:
4021
New No warranty — sold as-is

RM 335.40

14 units available

Enquire First
Order via WhatsApp

Collection in Puchong, Selangor: collect your order from KLAE PLT, No. 53, Jalan Metro 1/1, Bandar Metro Puchong, 47160 Puchong, Selangor, Malaysia — or arrange your own courier or rider to collect it for you. Shipping & Collection Policy Payment: Pay online by FPX (online banking) through Billplz, or by bank transfer. Items in an unpaid order are reserved for 48 hours.

Description

The MTL4021 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as solenoids, alarms, LEDs and other low-power devices that are certified as intrinsically safe or classified as non-energy-storing simple apparatus. By connecting a second safe-area switch or logic signal, the output can be disabled — for example, to let a safety system override a control signal. Earth-fault detection can be provided by connecting an MTL4220 earth leakage detector to terminal 6.

Specifications

Number of channels One
Location of load Zone 0, IIC, T4–6 hazardous area if suitably certified Div.1, Group A, hazardous location
Maximum output voltage 25.5V from 232Ω
Output ripple <0.5% of maximum output, peak-to-peak
Control input Suitable for switch contacts, an open collector transistor or logic drive 0 = input switch closed, transistor on or <1.4V applied across terminals 10 & 11 1 = input switch open, transistor off or >4.5V applied across terminals 10 & 11
Override input An open collector transistor or a switch connected across terminals 8 and 9 can be used to turn the output off whatever the state of the control input 0 = transistor on or switch closed 1 = transistor off or switch open
Control / override logic Control 0, Override 0 → Output off Control 0, Override 1 → Output on Control 1, Override 0 → Output off Control 1, Override 1 → Output off
Response time Output within 10% of final value within 100ms
No-fail' earth fault protection Enabled by connecting terminal 6 to an MTL4220 earth leakage detector Fault on either line proclaimed: unit continues working
LED indicators Amber: one provided for status, ON when output circuit is active Green: one provided for power indication
Power requirement (Vs) 100mA at 24V dc 120mA at 20V dc 75mA at 35V dc
Power dissipation within unit 1.3W with typical solenoid valve, output on 1.9W worst case
Isolation 250V ac between safe- and hazardous-area circuits
Safety description 25.5V, 232Ω, 110mA
FM entity parameters Voc = 25.5V dc, Isc = 110mA, Ca = 0.17µF, La = 3mH