Industrial Control & Instrumentation
MTL4041A 4/20mA Repeater, Passive Input
- Brand:
- Eaton/MTL
- Model:
- 4041A
RM 670.50
Only 2 left in stock
Order via WhatsAppCollection in Puchong, Selangor: collect your order from KLAE PLT, No. 53, Jalan Metro 1/1, Bandar Metro Puchong, 47160 Puchong, Selangor, Malaysia — or arrange your own courier or rider to collect it for you. Shipping & Collection Policy Payment: Pay online by FPX (online banking) through Billplz, or by bank transfer. Items in an unpaid order are reserved for 48 hours.
Description
The MTL4041A current repeater provides a passive 4/20mA input for separately powered smart transmitters and also allows bi-directional transmission of digital communication signals superimposed on the 4/20mA loop current, so that the transmitter can be interrogated either from the operator station or by a hand-held communicator (HHC).
Specifications
| Number of channels | One |
|---|---|
| Location of transmitter | Zone 0, IIC, T4–6 hazardous area if suitably certified Div.1, Group A, hazardous location |
| Input impedance for HART® signals (terminals 5, 6) | >230Ω |
| Maximum input volt drop (terminals 5, 6) | <6.2V i.e. a transmitter load of 310Ω at 20mA |
| Input and output signal range | 4 to 20mA |
| Over-/under-range | 1.0mA to 21.5mA |
| Digital signal bandwidth | 50Hz to 8kHz |
| Safe-area circuit load resistance | Conventional transmitters: 0 to 600Ω Smart transmitters: 250Ω ±10% |
| Safe-area circuit output resistance | >1MΩ |
| Safe-area circuit ripple | <50µA peak-to-peak up to 80kHz |
| Transfer accuracy at 20°C | Better than 20µA |
| Temperature drift | <1µA/°C |
| Response time | Settles within 200µA of final value after 20ms |
| Power requirement (at 20mA) | 70mA at 24V 85mA at 20V 50mA at 35V |
| Power dissipation within unit (at 20mA) | 1.6W at 24V 1.7W at 35V |
| Isolation | 250V ac between safe- and hazardous-area circuits |
| Safety description (terminals 3 to 4 and 5 to 6) | 8.6V (diode) — this voltage must be considered when calculating the load capacitance |