Skip to main content
KLAE PLT
MTL4046C 4/20mA Driver, Smart, O/C Detect

Industrial Control & Instrumentation

MTL4046C 4/20mA Driver, Smart, O/C Detect

Brand:
Eaton/MTL
Model:
4046C
New No warranty — sold as-is

RM 134.10

Only 2 left in stock

Enquire First
Order via WhatsApp

Collection in Puchong, Selangor: collect your order from KLAE PLT, No. 53, Jalan Metro 1/1, Bandar Metro Puchong, 47160 Puchong, Selangor, Malaysia — or arrange your own courier or rider to collect it for you. Shipping & Collection Policy Payment: Pay online by FPX (online banking) through Billplz, or by bank transfer. Items in an unpaid order are reserved for 48 hours.

Description

The MTL4046C isolating driver is identical to the MTL4046, except that it provides open-circuit detection only (no short-circuit detection). It accepts a 4/20mA floating signal from a safe-area controller to drive a current/pressure converter (or any other load up to 800Ω) in a hazardous area, with bi-directional HART® communication support for interrogating the device from the operator station or a hand-held communicator (HHC).

Specifications

Number of channels One
Location of I/P converter Zone 0, IIC, T4–6 hazardous area if suitably certified Div.1, Group A, hazardous location
Working range 4 to 20mA
Digital signal bandwidth 500Hz to 10kHz
Maximum load resistance 800Ω (16V at 20mA)
Minimum load resistance 90Ω
Output resistance >1MΩ
Under/over range capability Under range = 1.0mA Over range = 26.0mA (load ≤520Ω)
Input and output circuit ripple <40µA peak-to-peak
Transfer accuracy at 20°C Better than 20µA
Input characteristics <4.0V with the field wiring intact <0.9mA with the field wiring open-circuit (open-circuit detection only — no short-circuit detection)
Response time Settles within 200µA of final value within 100ms
Temperature drift <1.0µA/°C
Power requirement (Vs) 58mA at 24V dc 70mA at 20V dc 40mA at 35V dc
Power dissipation within unit 1.2W typical at 24V with 20mA loop current 1.4W worst case
Isolation 250V ac between safe- and hazardous-area circuits Input circuit is floating
Safety description 28V, 300Ω, 93mA, Um = 250V rms or dc